KITAMURA Horizontal Machining Centres

Why choose a Kitamura Horizontal Machining Centre?

Horizontal configuration with rotary pallets enables multi‑sided machining in a single setup, reducing cycle time and work in progress. 

Robust cast‑iron structures and hand‑scraped guideways on selected models provide stability for heavy cutting and long tool overhangs.

Efficient chip evacuation improves tool life, surface finish and process reliability in tough materials.

High‑speed ATCs and pallet systems support continuous operation and lights‑out production. 

Explore DTS’s range of Kitamura Horizontal Machining Centres

At DTS, we offer a comprehensive range of Kitamura Horizontal Machining Centres to match everything from compact high‑speed work to large‑capacity production.

• Kitamura Mycenter HX250iG – Compact horizontal machining centre for small precision parts and high‑speed production. 

• Kitamura Mycenter HX300iG – Versatile 300‑class HMC suitable for a wide mix of components and batch sizes. 

• Kitamura Mycenter HX400iG – Popular mid‑size HMC offering an excellent balance of capacity, speed and rigidity. 

• Kitamura Mycenter HX500iG-630 #40 – 500‑class horizontal centre with #40 taper spindle for high‑speed cutting and agile production. 

• Kitamura Mycenter HX500iG‑630 #50 – #50 taper variant providing additional torque for tougher materials and heavier cuts.

• Kitamura Mycenter HX630G‑800 #40 – Large‑capacity #40 taper HMC with extended travels for larger workpieces.

• Kitamura MycenterHX630G‑800 #50 – High-torque #50 taper version designed for heavy-duty machining and higher material removal rates.

• Kitamura MycenterHX800G – Heavy‑duty horizontal machining centre for large and heavy components. 

• Kitamura Mycenter HX1000G – Extra‑large capacity HMC for demanding structural parts and energy sector applications.

• Kitamura Mycenter HX1250G – Flagship large‑capacity horizontal machine for the heaviest and largest components in your production mix. 

 

Horizontal machining from DTS

Partnering with DTS for your Kitamura Horizontal Machining Centre gives you access to machine tool specialists with deep experience in production machining and automation. We can help you integrate pallet systems, tooling packages and process strategies that maximise machine utilisation and reduce cost per part. Speak to our team to explore the full capabilities of Kitamura horizontal solutions.

Kitamura Horizontal Machining Centres Frequently Asked Questions

What are the key advantages of a horizontal machining centre?

Horizontal machining centres offer excellent chip evacuation, access to multiple faces of a part and efficient use of pallet‑based automation. This combination typically results in shorter cycle times, better tool life and higher spindle utilisation compared with an equivalent vertical machine in volume production.

 

How do pallet changers improve productivity on an HMC?

With a pallet changer, you can set up and clamp the next job while the machine is cutting on the current pallet. When the cycle finishes, the pallets swap automatically, so the spindle spends more time cutting and less time waiting. Over a shift or a week, this can significantly increase throughput without adding extra operators.

 

Are Kitamura horizontal machines suitable for small batch work, or only large production runs?

While HMCs are traditionally associated with high‑volume production, modern Kitamura horizontals are very capable in high‑mix, low‑volume environments too. Flexible fixturing, pallet systems and smart programming mean you can run families of parts efficiently, even at lower batch sizes.

 

How do I decide between a #40 and #50 taper spindle?

Generally, #40 taper spindles are ideal for higher‑speed cutting and lighter to medium‑duty work, whereas #50 taper spindles provide more torque and stability for tougher materials and heavier metal removal. Your choice should be guided by the materials you machine, the tools you use and the level of stock removal required.

 

Can DTS support automation and integration around a Kitamura HMC?

Yes. DTS can advise on pallet systems, workholding, tool management, probing and integration with your existing production systems. We can help you design a complete cell that optimises material flow and machine utilisation, whether you’re upgrading from verticals or expanding an existing horizontal machining department.